Hi there! It’s been a while, I had the best intentions to do a lot more blogging in 2016. Oops. If you have a poke around you’ll see I’m not very good at the writing and documenting part of my creative life. Thanks for visiting me over here in the middle of a warm and sunny Sydney summer. Hope you are having a splendid day!
I assume some of you are here for tips on making Block 90 on The Splendid Sampler adventure. What a wonderful project Pat and Jane have put together, and can you believe we’re just 10 blocks shy of completing? I’ve been making some of the blocks along the way and now that I have a plan for sashing I’m more excited than ever to get cracking with it. I’ve made lots of sampler quilts, I really love them because there’s always something new and those little blocks are fun to make.
So, back to my little block… I’ve used some of my favourite techniques – applique circles, bias tape applique and wonky crosses. I love layering different techniques in a little block. But it can be a little daunting if you’ve never done something like this before. Working at a small scale also means I need to pay extra attention to extra bulk and staying inside the seam allowance.
As you read the pattern instructions you’ll see there are a few stages. I recommend you chunk it down to manageable parts if its the first time you try one of the techniques. Actually, even if you’re confident, take time to enjoy the process with a couple of cups of tea or a walk around the block…
Firstly, choose all your fabrics and gather your supplies. My suggested fabric quantities are generous so you can trim back your block. You’ll also see I use a metal 1/8″ bias tape maker. It came in a set which I bought online from California, I so wish I could get these easily locally. You may be lucky enough to have them at your local quilt store. But if not, you can carefully cut a strip of Mylar plastic. The metal bias bars get very hot and help form a nice crease, please be careful if you are using one.
I prefer using a metal bias bar and having a closed loop rather than an open bias tape because it is sturdier and I can manipulate it without worrying it will fray and lose the creases. It also stores nicely around a spool or wooden dowelling even in the most humid Sydney weather.
So grab your supplies and lets get started!
Prepare your 3 bias tape loops first. Cut your strips from an 8″ square of fabric. 3/4″ wide strips cut on the diagonal from the square.
Press strips in half. Wrong sides together, be gentle not to stretch them.
Place bias bar inside the fold and mark where your seam should go. Don’t make it too snug or you won’t be able to slide the bar in and out. I use a generous 1/8″ seam.
Once you have stitched the strip and you are sure you can move the bias bar in and out, trim back the seam allowance to reduce bulk.
We’re nearly there… twist seam to the back and press it down. Remove the bias bar. Repeat for the two other bias tape strips.
Wind them around your finger or a pencil to get them to curl a little. This will help you get nice tight loops to applique.
Make sure you’ve got all your fabric pieces ready to proceed. Background, squares for circles and strips to insert.
Trace the pattern lightly on to your background square. Trace the outside of the circles and one side of each loop. You will use this as a guide to place your applique. Make sure you leave plenty of room around the outside to centre your block. I also mark the corner points to help with trimming the block later.
Using little dots of applique glue, place your loops down on your background fabric. You can also use tiny applique pins or baste them down with thread.
Using a colour that camouflages with your applique loop, stitch it down firmly. See the tails of the loops? They will be hidden behind the appliquéd circles. Trim them on the diagonal to make them less bulky.
Now it’s time to prepare your juggling balls. This is a two step process. First we make the wonky crosses, then we trim them back to a circle to applique down.
Start with one of the square pieces of fabric and cut it randomly in half. Select which fabric strip you will be inserting.
Sew the strip to one half. Then stitch the other half of the square to it. Always using a 1/4″ seam allowance.
Cut this randomly across the strip you just set in. Choose your next fabric strip.
Stitch one side on first. Sewing the second side is a little trickier. You need to try to align the two sides, which is difficult with that pesky angled seam allowance in the way. I visually line it up as much as possible then fold over the seam allowance to check it. Sliding it up and down till its as good as I can get it.
Because I’m extra cautious I still don’t stitch the whole seam, I just sew the crucial middle of the seam bit first, flip it over and check it before stitching the whole lot. This may seam tedious but it’s not as tedious as having to unpick the whole thing!
Flipping over to the back of your wonky cross, trim or grade that top seam allowance. Usually we can press seams open to reduce bulky seams but the open seams stretch too much for these small circles.
Grab your circle template and trace around it with a pencil. Check out those graded seams…
Trim back your circle to a generous 1/4″ – 1/2″ seam allowance and stitch a running stitch around. Pull on the end of the threads to gather the circle around your template. Don’t cut your threads yet!
To get a nice smooth circle ready to applique down I run some starch around the outside edge of the circle with a brush. Or you can put a little pressing liquid in a dish and roll the edge around quickly. Press the circle with a warm iron, be careful not to melt your plastic template!
You can wrap a piece of foil around it if you like, that helps protect the plastic and holds the heat for longer to get a crisp edge.
Repeat that for the two remaining circles and applique them down into place. Choose fine thread that disappears when you place it over your applique shape.
When you are finished with all the applique, give it a light press and trim your block down to 6.5″.
And that’s another block done and ready to join the others! I hope you’ve learnt something new. We all have our favourite techniques and I know fiddly work isn’t for every one. You may want to skip making the bias tape loops and just applique ribbon or use embroidery to create the loops. And instead of those wonky juggling balls you can fussy cut some fun fabric circles…
Whatever you do, thank you for joining me for The Splendid Sampler. I look forward to seeing all your lovely blocks. And I’m eagerly awaiting The Splendid Sampler book that Pat and Jane are publishing with all the patterns so I can continue making more of these great blocks. It’ll be a lovely record of this fun project.
Here’s a photo of my original block that will appear in the book. In fact, I think it’s even on the cover. I can’t wait to see my block together with all the other Designer blocks!
I’m more of an Instagram girl these days, feel free to tag me if you have any questions. You can find me over there as lorena_in_syd. I know, sew original!
Happy stitching!
Lorena x